logo
Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd
ผลิตภัณฑ์
บ้าน /

ผลิตภัณฑ์

Manganin CuMn12Ni Precision Resistance Foil

รายละเอียดสินค้า

สถานที่กำเนิด: จีน

ชื่อแบรนด์: TANKII

ได้รับการรับรอง: ISO 9001

หมายเลขรุ่น: 6J12/6J13

เงื่อนไขการชำระเงินและการจัดส่ง

จำนวนสั่งซื้อขั้นต่ำ: 10

ราคา: โปร่ง

รายละเอียดการบรรจุ: ไม้+สิ่งของ+กล่องกระดาษแข็ง

เวลาการส่งมอบ: 10-25 วันทำการ

เงื่อนไขการชำระเงิน: ที/ที

สามารถในการผลิต: 500ตัน/ปี

รับราคาที่ดีที่สุด
ติดต่อตอนนี้
รายละเอียด
เน้น:
วัสดุ:
ทองแดงแมงกานีสโลหะผสมนิกเกิล
ความต้านทาน:
0.43-0.48 ไมโครโอห์ม·ม
ความหนาแน่น:
8.4 ก./ซม.³
ความหนา:
0.01-0.20 มม
ความกว้าง:
2-300 มม.
พื้นผิว:
สว่าง
เงื่อนไข:
อบอ่อน / แข็ง
การใช้งาน:
ตัวต้านทานแบบแบ่ง, ตัวต้านทานแบบตรวจจับกระแส, ตัวต้านทานแบบแม่นยำ, มิเตอร์อัจฉริยะ,
วัสดุ:
ทองแดงแมงกานีสโลหะผสมนิกเกิล
ความต้านทาน:
0.43-0.48 ไมโครโอห์ม·ม
ความหนาแน่น:
8.4 ก./ซม.³
ความหนา:
0.01-0.20 มม
ความกว้าง:
2-300 มม.
พื้นผิว:
สว่าง
เงื่อนไข:
อบอ่อน / แข็ง
การใช้งาน:
ตัวต้านทานแบบแบ่ง, ตัวต้านทานแบบตรวจจับกระแส, ตัวต้านทานแบบแม่นยำ, มิเตอร์อัจฉริยะ,
คําอธิบาย
Manganin CuMn12Ni Precision Resistance Foil

Manganin CuMn12Ni Precision Resistance Foil

Product Description
Manganin wire widely used for precision resistors with the highest requirements, the resistors should be carefully stabilised and the application temperature should not exceed +60 °C. Exceeding the maximum working temperature in air may result in a resistance drift generated by oxidizing. Thus, the long-term stability can be affected negatively.  As a result, the resistivity as well as the temperature coefficient of  the electric resistance may slightly change. It is also used as low cost replacement material for silver solder for hard metal mounting.
 
Chemical Content, %

Ni Mn Fe Si Cu Other ROHS Directive
Cd Pb Hg Cr
2~5 11~13 <0.5 micro Bal - ND ND ND ND

 
Mechanical Properties

Max Continuous Service Temp 0-100ºC
Resisivity at 20ºC 0.44±0.04ohm mm2/m
Density 8.4 g/cm3
Thermal Conductivity 40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC 0~40α×10-6/ºC
Melting Point 1450ºC
Tensile Strength(Hard) 585 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft 390-535
Elongation 6~15%
EMF vs Cu, μV/ºC (0~100ºC) 2(max)
Micrographic Structure austenite
Magnetic Property non
Hardness 200-260HB
Micrographic Structure Ferrite
Magnetic Property Magnetic

 
Resistance Alloy- Manganin Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft 
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm 
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
Enameled condition is available

Manganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for ShuntsManganin Alloy Foil Low TCR Resistance Material for Shunts

ผลิตภัณฑ์ที่คล้ายกัน
Cr15Ni60 Nichrome Resistance Heating Wire วิดีโอ
รับราคาที่ดีที่สุด
CuNi23 Alloy 180 Copper Nickel Resistance Foil วิดีโอ
รับราคาที่ดีที่สุด
Inconel 600 Corrosion Resistant Nickel Alloy Strip วิดีโอ
รับราคาที่ดีที่สุด
Inconel 600 High Temperature Nickel Alloy Wire วิดีโอ
รับราคาที่ดีที่สุด
ส่งคำถามของคุณ
กรุณาส่งคำขอของคุณถึงเราแล้วเราจะตอบกลับคุณโดยเร็วที่สุด
ส่ง